- Water only when AC is operating
- Drain line obstruction or incorrect fall
- Indoor unit and drip point images
Check when the dripping happens
Observe whether water appears only while the AC runs, shortly after it switches off, or even when it has not been used for several days. If it only appears during operation, the condensate path and local insulation may be relevant.
If the stain coincides with heavy rain and occurs even with the AC off, the building envelope or another source may need checking. More than one problem can occur at the same time.
- Water only when AC is operating
- Location relative to indoor unit or drain route
- Links with rain or adjacent unit water use
Potential AC-related causes
A condensate drainage obstruction, incorrect slope, a damaged drain connection or poor insulation around cold pipes can contribute to drips and local dampness. Cold surfaces may also collect atmospheric moisture.
The indoor unit should be serviced by an appropriate technician. Avoid dismantling electrical components or accessing high external units yourself.
- Drain line obstruction or incorrect fall
- Loose drain connection
- Condensation on poorly insulated cold pipes
What to document before booking
Take a photograph showing the entire indoor unit, the exact drip point and the wall or ceiling stain. Note the AC temperature setting, duration of use and whether a service has been carried out recently.
Where safe, avoid repeated operation if the leak could damage electrical fittings or finishes. Ask the technician to document what they cleaned, adjusted or tested and whether further building diagnostics are needed.
- Indoor unit and drip point images
- Recent servicing and operating conditions
- Repair actions and follow-up observations
When the issue is not just the AC
If the patch grows with the AC switched off or covers a wider ceiling area, investigate other plausible moisture paths. An AC service alone cannot rule out plumbing or exterior water ingress.
For persistent or recurring damage, a targeted moisture assessment may be appropriate. Agree on scope and access before intrusive testing.
- Observe after AC is switched off
- Check history of heavy rain or adjacent leaks
- Request additional moisture diagnosis where indicated
Common questions
Can a blocked AC drain cause mould?
Repeated moisture from a drainage problem can support microbial growth on affected material. The underlying moisture should be addressed and surfaces assessed appropriately.
Does AC dripping always require an AC replacement?
No. Some issues involve drainage or insulation, while others need repair or a different diagnostic path. A technician should assess first.